Acid Wash D1 (High Sustain) F9, S, 3.00.00a High Sustain Distortion - smooooth sustain. Stefan Bukowski SAP 

Steve Schow
From:	StefanBuk@aol.com
Sent:	Sunday, September 14, 1997 9:46 PM
To:	gsp-users@portal.com
Subject:	GSP: Sustain Patch 3

Categories:	SAP
#=======================================================
#
# Program:   Acid Wash D1
# Author:   Stefan Bukowski(StefanBuk@AOL.COM)
# Date Created:  9/14/97
#=======================================================
#
# Notes: High Sustain Distortion tone. This is a modification
# of Acid Wash C1. It has a good amount of smooth sustain to it.
# If the neck pickup is used, it roughens it up a little.
# (I also use the CC Pedal to give it even more sustain.
# Best for single note leads, otherwise it can get kinda ragged.
# I don't know how to document CC changes in SAP, but what I do is link
# gain 2 to go between 2.0 and 11.0, and Mixer C input 3&4 levels to go
# from 100 to 30 in order to keep levels similar.)
# I originally programed it using headphones.
# 
#setup :  Gibson Les Paul Studio Custom. I usually use both pickups,
# tone & vol on 10, but turning down the treble can be interesting.
# GSP-2101 into a Fender Princeton Amp 
# This uses a single S disk
#=======================================================
GSP-2101             # Device ID
3.00.00a             # Software Version
Acid Wash d1       # Program Name
F9                    # Algorithm Number
#=======================================================
# Module Parameter Settings
#=======================================================
Comp  (Bypass)
Dist  (On,SaturatedTube,6.0,2.0)
EQ  (0,+2,+4,+4,+10,0,-2)
MVol  (-6)
FxL  (Bypass)
SNGt  (On,-65,6,20,0,2000,20,10.0)
SCho  (On,100,16,.34,6,Tringl)
4X2  (100,-50,100,50,100,0,100,0,100,100)
Sdly2.0Sec  (On,.422,20,25,off)
4X2 (100,-50,100,50,100,-50,100,50,100,100)
2X1 (50,50,100)
Mverb (On,20,100,10,8000,20000,10,3.50,5)
4X2 (100,-50,100,50,100,-50,100,50,100,100)
MMix  (0,100)
#=======================================================
#=======================================================
# End Of Program
#=======================================================
#=======================================================