|
IN-4 (ИН-4) (Reflector/Sovtec) |
There were different shapes of this tube.
This is shape 2.
This tube can be used as a biquinary tube (cathodes connected externally)
or a normal nixie tube (anodes connected externally)
The datasheet of this tube has a mistake in it.
It reads, that only one anode should be connected. This is not correct!
Both of the anodes must be connected (Pin 10 and pin 13)!
| Röhrendaten/Tube Data | |||
| German | English | ||
| Typ | Type | IN-4 (ИН-4) | |
| Hersteller | Brand | Reflector/Sovtec | |
| Vergleichstypen | Substitutes | - | |
| Symbole | Displayed symbols | 0-9 | |
| Symbolhöhe | Symbol height | 17mm (0.670") | |
| Abmessungen | Dimensions | 31mm (1.220") dia. X 46mm (1.81") tall | |
| Pindurchmesser | Pin diameter | 1.02mm (0.040") | |
| min. Betriebsspannung | min. supply voltage | V | 170 |
| typ. Brennspannung | typ. maintaining Voltage | V | 135 |
|
Betriebs- Kathodenstrom |
Typical cathode current |
mA | 2.5-3 |
| Sockel | Base | PL-31, Pin 7 vorne/pin 7 at front | |
| Fassung | Socket | PL-31 | |
Pinout:
Datasheet (Attention incorrect values!!!):
Downloads/Datasheets:
Sie finden passende Datenblätter
im Datenblattarchiv.
Suchen sie dort nach dieser Type und deren Vergleichstypen.
You'll find the matching datasheets in
the datasheet archive.
Search for this type and its substitutes there.
Back
to Dieter's Nixie Tube Page
eMail to Dieter
Disclaimer
Impressum