DZ10 (Cerberus)
Nomotron counting tube
Very early 'Nomotron'
style unidirectional, single pulse, decimal glow-transfer counting tube, with
metal shell covering cathode pins inside tube.
Shell has holes for viewing glow
position, stamped with numbers 0-9.
Neon filled.
Rare!
The original box:
Röhrendaten/Tube Data:
| German | English | ||
| Röhrentyp | Tube type | DZ10 | |
| Hersteller | Brand | Cerberus | |
| Zähl-Richtung | Counting direction | unidirectional | |
| Arbeitsweise | Operation | single pulse | |
| Art | Sort | counting & selector tube with numbered shield (Nomotron) | |
| Sockel | Base | B14A | |
| Fassung | Socket | B14A | |
| Nullposition | Zero position | see pinout! | |
| Zähl-Schritte | Counting steps | 10 | |
| Anzahl der Hilfskathoden | Number of guides | 1, split in 2 | |
| Gasfüllung | Gas filling | Neon | |
| Röhrendurchmesser maximal | Tube diameter max. | mm | 56 |
| Röhrenhöhe maximal | Tube height max. | mm | 109 |
| max. Zähl-Geschwindigkeit | Max. counting speed | kHz | 3 |
| Betriebsspannung minimal | Supply volt. min. | V | 220 |
| Betriebsspannung typisch | Supply volt. typ. | V | 300 |
| Betriebsspannung maximal | Supply volt. max. | V | 400 |
| Brennspannung minimal | Maintaining voltage min. | V | 110 |
| Brennspannung typisch | Maintaining voltage typ. | V | 112 |
| Brennspannung maximal | Maintaining voltage max. | V | 115 |
| Anoden bzw. Kathodenstrom min. | Anode/cath. current min. | µA | 2000 |
| Anoden bzw. Kathodenstrom typ. | Anode/cath. current typ. | µA | 4000 |
| Anoden bzw. Kathodenstrom max. | Anode/cath. current max. | µA | 8000 |
| Anodenwiderstand typisch | Anode resistor typical | kΩ | 47 |
| Transferspannung minimal | Transfer voltage min. | V | 25 |
| Transferspannung maximal | Transfer voltage max. | V | 80 |
| Hilfskathodenvorspannnung Impulsbetrieb typ. | Guide bias typ pulse op. | V | 25 |
| Hilfskathodenimpulsspannung | Guide signal voltage pulse | Vp | -50 |
| Kathodenpotential aktive Kath. max. | Cathode pot. cond. max. | V | 35 |
| Kathodenwiderstand typisch | Cathode resistor typical | kΩ | 3.3 |
| Ausgangsspannung | Output voltage | V | 13 |
| Resetimpulsspannung | Reset pulse voltage min. | V | -80 |
| Resetimpulsdauer min. | Reset pulse duration min. | µs | 150 |
| Anschlussbelegung: | Pinout: | ||
| PIN 01 | PIN 01 | K1 | |
| PIN 02 | PIN 02 | G1 | |
| PIN 03 | PIN 03 | K0 | |
| PIN 04 | PIN 04 | K9 | |
| PIN 05 | PIN 05 | Anode | |
| PIN 06 | PIN 06 | K8 | |
| PIN 07 | PIN 07 | K7 | |
| PIN 08 | PIN 08 | K6 | |
| PIN 09 | PIN 09 | G2 | |
| PIN 10 | PIN 10 | K5 | |
| PIN 11 | PIN 11 | K4 | |
| PIN 12 | PIN 12 | Anode | |
| PIN 13 | PIN 13 | K3 | |
| PIN 14 | PIN 14 | K2 |
Pinout & Outline:
Ansicht von unten/
Bottom view
Downloads/Datasheets:
Sie finden passende Datenblätter
im Datenblattarchiv.
Suchen sie dort nach dieser Type und deren Vergleichstypen.
You'll find the matching datasheets in
the datasheet archive.
Search for this type and its substitutes there.
Back
to Dieter's Nixie Tube Page
eMail to Dieter
Impressum & Datenschutz