OG3 (ОГ3) (Reflector/Sovtec)
Dekatron counting tube

Bi-directional single-pulse decimal counting tube.
Argon filled.

The following pictures show the tube spinning.
Of course, only one of the cathodes is glowing, but the opening time of the camera leads to that different pictures:

a long opening time of the camera:

a short opening time of the camera:

by night, with  long opening time of the camera:

An animation of a spinning dekatron (neon filled, colour not like the OG3!):

German English    
Röhrentyp Tube type   OG3 (ОГ3)
Hersteller Brand   Reflector/Sovtec
Vergleichstypen Substitutes   -
Zähl-Richtung Counting direction   bidirectional
Arbeitsweise Operation   single pulse
Art Sort   counting tube
Sockel Base   K8A
Fassung Socket   K8A
Nullposition Zero position   Pin 1
Zähl-Schritte Counting steps   10
Anzahl der Hilfskathoden Number of guides   3
Gasfüllung Gas filling   Argon
Röhrendurchmesser maximal Tube diameter max. mm 33
Röhrenhöhe maximal Tube height max. mm 76
       
max. Zähl-Geschwindigkeit Max. counting speed kHz 20
Betriebsspannung minimal Supply volt. min. V 420
Betriebsspannung typisch Supply volt. typ. V 450
Brennspannung minimal Maintaining voltage min. V 170
Brennspannung typisch Maintaining voltage typ. V 190
Brennspannung maximal Maintaining voltage max. V 210
Anoden bzw. Kathodenstrom min. Anode/cath. current min. µA 600
Anoden bzw. Kathodenstrom typ. Anode/cath. current typ. µA 700
Anoden bzw. Kathodenstrom max. Anode/cath. current max. µA 800
Netzteil Leistung minimal Power supply power min. mW 315
Hilfskathodenvorspannnung minimal Guide bias volt. min. V 40
Hilfskathodenvorspannnung Impulsbetrieb typ. Guide bias typ pulse op. V 40
Hilfskathodenvorspannnung maximal Guide bias volt. max. V 50
Hilfskathodenimpulsspannung Guide signal voltage pulse Vp 110-140 (125)
Hilfskathodenimpulsdauer minimal Guide signal pulse duration min µs 17-22
Resetimpulsdauer min. Reset pulse duration min. µs 2-5
       
Anschlussbelegung: Pinout:    
PIN 01 PIN 01   G3
PIN 02 PIN 02   K1-9
PIN 03 PIN 03   G2
PIN 04 PIN 04   NC
PIN 05 PIN 05   G1
PIN 06 PIN 06   A
PIN 07 PIN 07   Guide3 (K0)
PIN 08 PIN 08   K0

Pinout, outline and typical application:

     

Downloads/Datasheets:

Sie finden passende Datenblätter im Datenblattarchiv.
Suchen sie dort nach dieser Type und deren Vergleichstypen.

You'll find the matching datasheets in the datasheet archive.
Search for this type and its substitutes there.


Back to Dieter's Nixie Tube Page

eMail to Dieter
Disclaimer
Impressum