MUD0X 3J
(Valvo/ Philips) |
The tubes were made for TV channel displays in the "good old times" - basically the tube is a simplfied ZM1000 / 1005 with only numerals 1 - 8 in some OCR shape. If you look at the base of Valvo / Philips (probably Amperex too) ZM1000s you will see some triangle + number + letter (like 6B or such). These triangles show up on the "Mudox" marked tubes too - but they have no "official designation" nor a manufacturer stamped on the envelope. So they are just "OEM-Nixies" for a special purpose. In Germany Nordmende and Telefunken used them a lot AFAIK.
The code is read MUD-
"zero" - X. the tube-code is "MUD" and the
trailing (one, two or three) digits give a subtype code, which is
*usually* "0X" (zero, x) for the generic OCR-like 1-8
digit Nixies.
Other examples are "MBT" for a ZM1000 or "MGM"
on ZM1005. The second half is for instance "1TT" on ZM1000
with the sheetmetal-getter and "3TT" with those that
have the getter ring. It is like a "family" - "subtype"
coding.
Röhrendaten/ Tube Data | |||
German | English | ||
Typ | Type | MUD0X 3J | |
Hersteller | Brand | Valvo/ Philips | |
Vergleichstypen | Substitudes |
alle MUD - Typen, ZM1012, ZM1015/ all MUD- Types, ZM1012, ZM1015 |
|
Ansicht | View | seitlich/ side | |
Symbole | Displayed symbols | 1-8, PL, PR | |
Symbolhöhe | Symbol height | 14mm (0.55") | |
Abmessungen | Overall dimensions | 19mm (0.75") dia. X 45.1mm (1.78") tall | |
Pindurchmesser | Pin diameter | 0.6mm (0.025") | |
min. Betriebsspannung | min. Supply Voltage | V | 170 |
typ. Brennspannung | typ. maintaining Voltage | V | 140 |
Betriebs- Kathodenstrom |
Typical Cahthode Current |
mA | 2.5 |
Sockel | Base |
Euro Grid, Pin 1 und 10 vorne/ Euro Grid, pin 1 and 10 in front |
|
Fassung | Socket |
Euro Grid oder Einlötbuchsen 0.6mm/ Euro Grid or Pin Receptacles 0.6mm |
Pinout:
|
(Pinout- graphic by Alan Franzman)
Ansicht von unten / Bottom view
Pfeil zeigt Blickrichtung / Arrow shows direction of
viewing!
Outline:
Dimensions in mm!
Sie möchten sich die Fassungen lieber selbst
herstellen?- kein Problem, verwenden Sie handelsübliche
Buchsenleisten zur Aufnahme von 0.6mm Pins.
You like to make the sockets by yourself? -
No problem! Use standard- connector posts.
Self made socket: Original socket:
Downloads/Datasheets:
Sie finden passende Datenblätter
im Datenblattarchiv.
Suchen sie dort nach dieser Type und deren Vergleichstypen.
You'll find the matching datasheets in
the datasheet archive.
Search for this type and its substitutes there.
Back
to Dieter's Nixie Tube Page
eMail to Dieter
Impressum & Datenschutz