EZ10B (Elesta)
Dekatron counting tube
Uni-directional single-pulse decimal counting tube.
Hydrogen
filled.
Hier findet ihr mein Dekatron-Spinner Projekt
mit dieser Röhre/
Here you'll find my Dekatron-Spinner Project with this tube
The printing on that sticker means:
"design sample,
future availability is not guaranteed"
Industrial boxes (absolutely rare):
The following pictures show the tube spinning.
Of course, only one of the cathodes is glowing, but the shutter speed of the
camera generates different pictures:
a normal shutter speed of the camera:
a normal shutter speed of the camera in darkened ambient:
a low shutter speed of the camera:
one cathode glowing only (rest position):
An animation of a spinning dekatron (neon filled, colour
differs from the EZ10B of course):
Hier findet ihr mein Dekatron-Spinner Projekt
mit dieser Röhre/
Here you'll find my Dekatron-Spinner Project with this tube
Röhrendaten/Tube Data:
| German | English | ||
| Röhrentyp | Tube type | EZ10B | |
| Hersteller | Brand | Elesta | |
| Vergleichstypen | Substitutes | - | |
| Zähl-Richtung | Counting direction | unidirectional | |
| Arbeitsweise | Operation | single pulse | |
| Art | Sort | SEL | |
| Sockel | Base | ZB13 | |
| Fassung | Socket | ZB13 = TSM-13P | |
| Zähl-Schritte | Counting steps | 10 | |
| Anzahl der Hilfskathoden | Number of guides | 1 split in 2 parts | |
| Hinweise | Remarks | purple color | |
| Gasfüllung | Gas filling | Helium/Hydrogen | |
| Röhrendurchmesser maximal | Tube diameter max. | mm | 21 |
| max. Zähl-Geschwindigkeit | Max. counting speed | kHz | 1000 |
| Betriebsspannung minimal | Supply volt. min. | V | 500 |
| Betriebsspannung typisch | Supply volt. typ. | V | 580 |
| Brennspannung minimal | Maintaining voltage min. | V | 280 |
| Brennspannung typisch | Maintaining voltage typ. | V | 300 |
| Brennspannung maximal | Maintaining voltage max. | V | 330 |
| Anoden bzw. Kathodenstrom min. | Anode/cath. current min. | µA | 1200 |
| Anoden bzw. Kathodenstrom typ. | Anode/cath. current typ. | µA | 1500 |
| Anoden bzw. Kathodenstrom max. | Anode/cath. current max. | µA | 1900 |
| Anodenwiderstand typisch | Anode resistor typical | kΩ | 180 |
| Hilfskathodenvorspannnung minimal | Guide bias volt. min. | V | 55 |
| Hilfskathodenvorspannnung Impulsbetrieb typ. | Guide bias typ pulse op. | V | 80 |
| Hilfskathodenvorspannnung Sinusbetrieb typ. | Guide bias typ sine op. | V | 120 |
| Hilfskathodenimpulsspannung (Rechteck) | Guide signal voltage rectangle | Vp | 100-220 |
| Kathodenwiderstand typisch | Cathode resistor typical | kΩ | 6,8 |
| Kathodenwiderstand maximal | Cathode resistor max. | kΩ | 6,8 |
| Ausgangsspannung | Output voltage | V | 7 |
| Resetimpulsspannung | Reset pulse voltage min. | V | 120 |
| Resetimpulsdauer min. | Reset pulse duration min. | µs | 0,5 |
| Anschlussbelegung: | Pinout: | ||
| PIN 01 | PIN 01 | K0 | |
| PIN 02 | PIN 02 | K9 | |
| PIN 03 | PIN 03 | K8 | |
| PIN 04 | PIN 04 | K7 | |
| PIN 05 | PIN 05 | K6 | |
| PIN 06 | PIN 06 | K5 | |
| PIN 07 | PIN 07 | K4 | |
| PIN 08 | PIN 08 | K3 | |
| PIN 09 | PIN 09 | K2 | |
| PIN 10 | PIN 10 | K1 | |
| PIN 11 | PIN 11 | G1 | |
| PIN 12 | PIN 12 | no pin | |
| PIN 13 | PIN 13 | G2 | |
| PIN 14 | PIN 14 | no pin | |
| PIN 15 | PIN 15 | A |
Downloads/Datasheets:
Sie finden passende Datenblätter
im Datenblattarchiv.
Suchen sie dort nach dieser Type und deren Vergleichstypen.
You'll find the matching datasheets in
the datasheet archive.
Search for this type and its substitutes there.
Back
to Dieter's Nixie Tube Page
eMail to Dieter
Impressum & Datenschutz